News
Home News

How to replace the movement and cutter of ITPP052

How to replace the movement and cutter of ITPP052

  • November 13,2015.

Step1:Remove front cover

Push in the direction shown by the arrow.


Step2: Remove the head cover.

Follow the direction of arrow to break off the axle, then tilted the head cover and take out(starting from the left side). as shown in the picture.


Here is the head cover:



Step3: Remove the case and flat cables of ITPP052

a.Unscrew the four screws as picture shown


b.Then remove the flat cables, Pay attention to the balance of force to avoid any damage



Step4: Remove middle cover: Unscrew the four screws as picture shows and put it aside.




Step5: Remove movement and cutter

a. Unscrew the screw which connected to the ground wire


b. Unscrew four fixed screws as picture shows.


c. Cut of the cable tie then take off the movement and cutter.




Step6: Remove the movement and cutter

a.Unscrew the four screws as picture shown



b. Pay attention to the card hook



Step7: After replace the new cutter or the movement, Just do the above steps conversely.

You must arrange the flat cables and the ground wires



Two ground wires:



© Copyright: 2019 ISSYZONE TECH CO., LIMITED.All Rights Reserved. 粤ICP备16058861号

Chat now

Live Chat

    Email us with any questions or inquiries or use our contact data. We would be happy to answer your questions.